Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

TRP TRP-29 Rotor
$39.99 - $45.99
TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)
Sunlite MX Side Pull Set (Single)
$25.00
•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork
Shimano 6-Bolt Disc Brake Rotor
$35.00 - $45.00
Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.
Shimano Alivio V-Brake
$25.00
• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver
Shimano Deore XT BL-M8100/BR-M8120 Disc Brake and Lever
$250.00
With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation
Shimano SLX SM-RT70-SS Center Lock Rotor
$51.99
SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors. - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)
Shimano Ultegra RT800 Centerlock IceTech Disc Brake Rotor
$75.00
Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece
Shimano XT BL-M8100/BR-M8120 Disc Brake and Lever
$250.00
Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup
Shimano XT M8100 Hydraulic Disc Brake
$215.00
The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic
Serfas BP10 Shimano Compatible Road Brake Pads
$10.00
Serfas' durable BP10 Shimano Compatible Road Brake Pads provide the reliable stopping power in all conditions. Plus, their cartridge style makes installation easy.
Serfas BPC10 Cantilever Compatible Road Pads
$12.00
• Smooth Post • Standard Rim Compound • Applicable Hardware Included • Easy to Install • Durable, Long Lasting Compound
Serfas BPV10 MTB V-Brake Compatible Pads
$12.00
Serfas' durable BPV10 MTB V-Brake Compatible Pads provide reliable stopping power in all conditions. Plus, they self center for easy installation.
SRAM CenterLine Rotor with Rounded Edge
$50.00 - $55.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
SRAM CenterLine X 6-bolt 2-Piece Rotor (Steel Bolts)
$58.00 - $65.00
CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts
SRAM Centerline CenterLock Rotor
$45.00 - $60.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
SRAM Guide T Disc Brake/Lever
$113.00
Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose
SRAM Level T Disc Brake
$120.00
Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.
SRAM Paceline Rotor
$40.00 - $50.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
Odyssey Ghost Brake Pads
$12.00
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Magura STORM HC
$38.00
- The Storm HC rotor is designed for extreme use and unparalleled braking performance under high braking forces.
Kool-Stop Campi Super Record Brake Pad Inserts
$11.25 - $21.98
- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear
Kool-Stop Steel Disc Pads (Shimano)
$18.25 - $25.00
- High performance compounds recommended for all-conditions - Steel backing
Hope E4 Brake Pads
$25.00 - $30.00
Replacement pads for Hope E4 hydraulic disc brakes.
Avid Disc Brake Pads (Code)
$24.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$25.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Zipp Tangente Cork Brake Pads
$43.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Zipp Tangente Platinum Pro Evo Brake Pads
$47.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
Tektro E10.11 Disc Brake Pads
$12.99
- High Performance Brake Pads - Disc Pad Material: Organic
Tektro M530
$18.99
- Forged aluminum arms - 102mm arm length - 158g
Tektro RL721
$27.99
- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair
Page 1 of 9 Next page