Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

Odyssey Cable Knarps
$6.00
- Sold in pairs - Allen wrench included
Odyssey Euro Bottom Bracket
$45.00
- For 19mm crank spindles and threaded Euro bottom bracket frames. - High-quality four bearing design with aluminum cups.
Odyssey Ghost Brake Pads
$12.00
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Gyro G3 Lower Cables
$12.50
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey Gyro G3 Upper Cables
$12.50
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Odyssey Twisted PC Pedals
$13.99 - $25.00
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Kink Brake Mount Kit
$18.00
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster. TECH SPECS - Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster - Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands. - Weight: 1.5oz
Sunday Cornerstone Grips
$11.00
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
Stolen Thermalite Bar Plugz
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
Stolen Thermalite Peg
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually
Odyssey Broc Raiford Signature Grips
$12.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
Odyssey Clutch Hub Guard
$22.99
- Press fit designed to work the hub's non-drive side collar.
Odyssey GTX-S Gyro
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
Odyssey Graduate Peg
$18.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - 1.5-inch outer diameter - 14mm with 3/8-inch adapter - Sold individually - Weight: 7.6oz - Replacement sleeves sold separately
Odyssey HGS Spokes
$35.00
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Odyssey La Guardia Sprocket
$60.00
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
Odyssey MPEGs Steel Pegs
$20.00
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Odyssey Par Ends
$5.00
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
Odyssey Quartet Hub Guard
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey Race Linear Kable
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black
Mission BMX M24 Fork Cap Bolt
$12.99
Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench. - Thread type: M24×P1.5 - Thread Length: 15mm - Weight: 0.7oz
Mission BMX Targa Peg Sleeve
$5.99
Replacement nylon sleeve for the Mission Targa peg. Sold individually. Product Specifications - Compatibility: Fits Mission Targa Peg Only - Material: Nylon Composite - Weight: 2oz
Kink Drift Peg
$17.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. Drift pegs have a 1.5" outer diameter. Replacement sleeves are also sold separately. TECH SPECS - Material: 7075-T6 Aluminum core w/ nylon sleeve - Diameter: 1.5" (38mm) - Axle Size: 3/8" and 14mm - Weight: 3.4oz (each)
Kink Drift Peg Sleeve
$5.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only
Kink Fork Cap Bolt
$9.99
The Kink fork cap bolt aims to make things just a little more convenient and is keyed for both a 6mm allen key and 3/8" ratchet drive. The cap itself is CNC machined from high-grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a majority of other forks, as well. TECH SPECS - Thread Type: M24×P1.5 - Tool Type: 3/8" Ratchet and 6mm allen hex - Material: 7075-T6 Aluminum - Weight: 0.8oz
Kink Myriad Gyro
$34.99
The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables. TECH SPECS - Material: 6061-T6 Aluminum - Bushing: Smooth nylon - Weight: 1.1oz
Kink Myriad Gyro Plate
$12.99
The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market. TECH SPECS - Material: 6061-T6 Aluminum - Size: Universal - Weight: 0.4oz
GSport G.L.A.N.D. MK IV Hub Guards
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
GSport Uniguard Hub Guard
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
Cinema BMX Beta Sprocket Guard
$9.99
Replacement high-impact plastic guard for the Cinema Beta sprocket. - Size: 25T - Material: High-impact plastic - Weight: 2.1 oz
Page 1 of 2 Next page