Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$9.49
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
$6.49
- Soft foam grip donuts prevent thumb blisters from riding gloveless
- Intended for use with flanged BMX grips to prevent rubbing and irritation
$9.49
- Cable hanger and straddle cable
- Alloy construction
- Anodized finish
- Great for Canti and U-Brakes
$103.95
Metric fastener kit with an assortment of nuts, bots and washers.
- Assortment of commonly used bicycle fasteners
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application
- These hangers do not come with mounting hardware
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$15.00
DPX2 Damper Shaft for FOX suspension service and repair.
- FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
- Cane Creek LT G4 Elastomer Insert -Soft
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included
$4.99 - $35.00
- 6061 Forged Alloy
- Made to O.E.M. specifications
- Correct hardness to reduce damage to frame upon impact
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$32.00 - $35.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
- NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place
- NOTE: NOT FOR USE with carbon fiber seatposts
- NOTE: Please consult your seatpost manufacturer to check compatibility
- Max torque 3–5Nm
- AL-6061 Aluminum
- Strong rack attachment points
- 34mm-wide rack mount threaded for M5 bolts
- Available for 27.2, 30.9, and 31.6 mm diameter seatposts
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$25.00
Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.
$9.00
Hose fittings fit many of SRAM's newest hydraulic brake models.
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$36.95 - $46.95
$95.00
Up to 61% Off
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 4 N/mm (23 lbs./in).
- Fits Ohlins TTX shock absorber for Stumpjumper FSR only.
- Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.
$8.99
Integrated spacer and top cap for use with star nuts and standard alloy steerer tubes
- Provides a clean and lightweight stem cap solution
- 6061-T6 alloy cap with 7075 alloy bolt
$19.95
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length.
- Designed for M8 x .75 thread pitch
- 10mm long
- 4mm hex head
- Bolt length is laser engraved onto the bolt head for easy length identification
- 6-7 Nm installation torque with light grease on threads only
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
$3.59
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$4.19
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$4.19
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette
- Range: 4mm
- Color: Silver
$2.09
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$10.49 - $12.59
- Stainless steel button head bolts
- Sold in bags of 10
$23.09
- Replacement padded arm rests for clip-On Tri-Bar II
- Easy clip on installation fits most road bars
- Clamp Size: 22.2mm
$25.19
• Quick-release seatpost clamp
• Full stainless-steel construction
• Rubber-covered handle for a great grip