Parts & Accessories

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

Pack of 4 low-profile head saves weight while providing appropriate clearance for the bottle. The flange head better distributes load across nearly 3x more surface area than a cap screw and more than 2x the surface area of a button head providing both increased rigidity and lower stress. Each screw is machined complete in one operation from 6Al/4V Titanium on a Swiss Lathe.  Threads are roll formed for peak strength and material grain alignment in the finished screw. 6Al/4V Titanium - Four M5x12mm - 4mm Head Height - 1.8g each - Machined for a T25 Torx

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

Kick up all the dirt you want, without eating it. This mud cap is compatible with all new Podium bottles launched in 2019, including Podium Chill, Podium Big Chill and Podium Ice. No matter what bottle you prefer, you can now drink clean.

Keep your reservoir funk-free with this cleaning brush kit from CamelBak.

The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor

The drip-proof Hip Pack Hydration Bladder 1.5, with its flexible hose and bite valve, is easy to clean and doesn't contain any toxic substances. - Free from BPA and PVC - Leak-proof and easy to fill with Slide Seal - Plug-n-Play allows quick removal of the hose - Volume: 1.5L - Weight: 130g - Measures: 28 x 18 x 1cm

- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC

The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm

The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm

- Extra-strong magnet keeps the drinking tube in position during your activity. - Two-piece design for attachment to the hip belt, backpack or vest - Fits all EVOC hydration systems (excluding insulated drinking tubes)

The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

The Compact is a revolutionary reversible bladder. With its wide shape it's the perfect hydration bladder for hip packs such as our Zulo 6 model. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. The hydration bladder is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.

This Shape-Shift hydration system adds a versatile baffle. The baffle can be zipped to slim the bladder profile and unzipped to increase fluid volume or reverse to clean and dry. The patented super-wide slide top opening makes it easy to load up with ice on hot days and turn inside out to clean when your adventure is complete. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. The hydration bladder is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.

The Blaster is a quality high flow 45 degree angle mouthpiece. With its self-sealing silicone sheath it provides a good flow of water and self seals itself after each sip. The valve also has a twist shut-off function to limit the flow of water while not riding or to avoid spills in the car.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)