Shop All Gear

This tire is designed to shed mud and deliver traction on pavement and dirt. The Cultivator doubles as a solid tire for both the commuter and cyclocross rider.

Before the Pika, gaining traction on gravel roads was a true feat. Now, it’s child’s play. Ramped center knobs roll fast on loose gravel, and U-shaped shoulder knobs dig in on the turns. The Pika is equipped with dual compound tread, EPS protection, and wire bead.

- Complete shifter and brake cables and housing kit - Low friction, prelubricated casing - Cable Material: Stainless Steel - Cables & Housing: Comp.Campagnolo Ergopower Ultra-Shift

- 3D forged and CNC machined from AL6061/T6 - 4-bolt cold-forged front clamp - 40 mm fork clamp stack height - Weight: 144 g (100 mm)

- Made with USDA-certified organic ingredients - Natural honey sandwiched between 2 thin waffles - Allergens: contains wheat & soy, may contain traces of eggs

- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Keep those shoes clean! Our Muc-Off Premium Bike Shoe Cleaner makes it easy to get rid of dirt, grime and odors from the outer material of your MTB, gravel or road cycling shoes. It’s a non-toxic, yet super powerful cleaner that’s not only safe for you and your shoes but the environment too. Look fresh, ride rad! It’s a non-toxic, yet high performing neutral cleaner that is effective at cleaning a range of grime and stains without affecting the breathability of materials. Formulated without any harsh chemicals or abrasives to ensure it is safe to use on the wide range of materials used in shoes. It has been tested on over 60+ shoes made from a very wide variety of materials, including: Natural fabrics, synthetic fabrics, technical fabrics, suede, nubuck, leather and other fabrics. Features: - Biodegradable, environmentally friendly, water-based formula - Powerful cleaning performance - Doesn’t compromise breathability - Suitable and safe - specifically designed for bike shoes - Safe on technical fabrics, suede, nubuck, leather and other fabrics* - Perfect for preparing your footwear for fresh waterproofing/re-proofer treatments such as Muc-Off Premium Footwear Shield - Handy sized 250ml spray bottle

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

The EP-1 is purpose-built to securely install end caps onto brake, derailleur, and dropper post cables. The short tapered jaws with dual crimping positions make it ideal for crimping in tight, inaccessible spaces. Built from forged machined steel with vinyl-dipped handles.

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel. - Thickness: 1.95 mm - Length: 162 mm (6.4")

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.

- Extended length down tube piece to protect this high risk area from rock chips, wear & scratches - Fits all makes, models and sizes - Designed around mountain bike geometry - Frame coverage ~10%. Includes downtube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Comfortable ride - Classic colors

Sun Race, FCM300, Crankset, 48/38/28T, 170mm

- Slick, zig-zag, pattern makes for smooth progress - Tire Width: 4.00 - TPI: 72 - Tire PSI: 8-30 - Tire Compound: MPC - e-Bike approved: Yes

- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - The tips are microscopically roughened for optimal bite to the screw. - "Take it easy" tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature

- Insulated bottle, keeps liquid cold (or warm) for more than 2h - Made from BPA-free, taste-less and odour free polypropylene - Internal metallic PET and polyethylene foam insulation - Fits all standard bottle cages - Made in France - 550ml

- Insulated bottle, keeps liquid cold (or warm) for more than 2h - Made from BPA-free, taste-less and odour free polypropylene - Internal metallic PET and polyethylene foam insulation - Fits all standard bottle cages - Made in France - 750ml

- Christophe Vintage toe-clip - Celebrating 130 years of history - Steel cage - Chrome finish - 01: S/M; -02: L/XL