Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shop All Gear

Abbey Bike Tools 4-Way Multi-tool with 2.5 4 5 T25 Bits
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
Abbey Bike Tools DU Bushing Service Tool
This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.
Abbey Bike Tools Saw Guide Tool
The unique thing about our Saw Guide is that the clamp is open, so you can slide it around the steer tube instead of having to slide it over the end. It doesn't sound like that big of a deal but it means you can get an accurate and square cut without taking the fork off the bike and more importantly without taking all the cables out of the bike. Use this tool once for that application and it's paid for itself. Of course it will work on normal steer tubes as well and give you a nice square cut every time. The guide is two sided, one side for standard toothed metal cutting blades and the opposite side is wider for abrasive blades used to cut composites. You can also use the guide in a vise like you're probably use to and it's pretty compact if you want to travel with it. Compatible with 1" and 1.125" steer tubes Currently not compatible with cutting handlebars!
Apidura Frame Pack Hydration Bladder
The most effective way to carry water in a Full Frame Pack. This is the first frame pack specific bikepacking hydration bladder, optimised for efficient use of space. Now your customers don't need to compromise between carrying water and other essentials. Key features: -In-pack refilling -Secure roll top closure -Quick click hose connection -Large bite valve -Clear fill markings -PVC free -Detachable 1.2m long hose -120g Fits all FULL Frame Packs from the Expedition and Backcountry series. Also fits Expedition Compact Frame Packs (4.5L and 5.3L), and the Expedition Tall Frame Pack 6.5L
Apidura Racing Hydration Pack
Tailormade for gravel and adventure cyclists. Designed for long mixed terrain rides and races where extra water capacity and quick access to food and supplies is essential. With an included fast-flow bladder (2.0 L), and selection of pockets on both the front and rear, the pack adds significant capacity and versatility to race setups without limiting access to jersey pockets. - Lightweight, breathable 3D mesh construction - 70D lightweight ripstop with TPU waterproof coating - Stretch mesh pockets - Lycra side panels provide stretch and comfort - Quick release buckles incorporating magnetic hydration hose clip - Available in two sizes to enable the perfect fit for all body shapes - L/XL is designed for riders with a 80-125cm chest measurement - Total pack capacity: 7.0 L - 414g
Bern FL-1 Libre
With its sleek, lightweight fit and simple design, the FL-1 Libre is for riders who are looking for a dependable helmet that will protect your head, and won't break the bank. With 18 vents, In-Mold design and Crank-Fit adjustability, the FL-1 Libre keeps you cool and safe while burning pavement, or taking in the fresh mountain air. Life, Libre and the pursuit of happiness! - Small: 52-55.5cm, Medium: 55.5-59cm, Large: 59-62cm - Weight 248 Grams - Standards CPSC, EN1078
Bike Yoke Divine SL Dropper Seatpost
Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel. - Infinite adjust, 125mm travel - Total overall length: 445mm - But can be easily cut to as short as 375mm - Titanium saddle bolts - Tapered lower tube - Compatible with oval and carbon saddle rails - Sub-zero temperature functionality - Fully user serviceable - 450g Sold as seatpost only—Remote/Trigger's are sold separately.
Bike Yoke Divine SL/Rascal Dropper Service Kit
Service kit for 100 hour service (readjusting play and replacing wiper). Kit includes: - 1x Wiper - 6x Glide pin - 1x Lower bushing - 1x Foam ring - 1x C-clip - 1x Upper bushing
Bike Yoke Revive MAX Dropper Seatpost
The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.
Bike Yoke Revive/Divine Cable Clamp
Fits: REVIVE/REVIVE 2.0, REVIVE MAX, and DIVINE Includes: - x1, Cable clamp body (# 52) - x1, M4 Set screw (# 7)
Burgtec MK4 Composite Flat Pedal
The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g
Burgtec Penthouse MK5 Flat Pedal
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Burgtec Penthouse MK5 Replacement Internals Kit
Replacement Pedal Internals for your Burgtec Penthouse Flat MK5 Pedals. Keep your pedals running sweet with some new internals. - 2 x Seals - 2 x Large Bush - 2 x Small Bush - 2 x Bearings - 2 x Washer - 2 x Nylock nuts
Burgtec Rear Axle 168.5mm x 12mm x 1.0mm Pitch (Santa Cruz)
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Burgtec Rear Axle 171mm x 12mm x 1.5mm Pitch (Yeti 12 x 148)
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - For use with 12 x 148 Yeti Bicycles. Fits: - SB165 - SB150 - SB140 - SB130 - SB115 - SB100 - SB4.5 - SB5 - SB5.5 - SB6
Burgtec Ride Wide Alloy DH
The Burgtec Ride Wide Alloy DH Handlebars, built for the toughest and most demanding tracks on the planet - 800mm width - 9 degree backsweep - 5 degree upsweep - Suggested cut down marks - Weight: 340g
Burgtec Ride Wide Alloy Enduro
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar. It's the little differences that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Jackson Goldstone, Nina Hoffman, and Laurie Greenland. - 800mm width - 9 degree backsweep - 5 degree upsweep - Suggested cut down marks - Weight: 300g
Burgtec Ride Wide Carbon Enduro
Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars is built to take a beating. - Uni-Directional Carbon - 800mm width - 35mm bar clamp - 20mm or 30mm rise - 9 degree backsweep - 5 degree upsweep - Weight: 258g
Burgtec SRAM GXP ThickThin Chainring
GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said. - 12 spd Eagle compatible. - Designed and tested in MTB heaven, the Peak District. - Keeps your chain on!
Burgtec Shimano Crank Bolt for Hollowtech II Cranks & Shimano E-Bike Motors
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
Burgtec Stem Spacer Kit
When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.
Burgtec The Bartender Pro Greg Minnaar Signature Grip
"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On
Burgtec The Bartender Pro Super Soft Greg Minnaar Signature Grip
The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core
CatEye HL-EL160 & Omni 5
- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type : 2 x AA alkaline battery - 5 ultra bright LEDs - Design offers high visibility - 3 modes: rapid, flashing, constant - Run time: R - 60h to 120h, F - 40h to 120h - 2x AAA batteries included - FlexTight bracket
Honey Stinger Organic Waffles
- Made with USDA-certified organic ingredients - Natural honey sandwiched between 2 thin waffles - Allergens: contains wheat & soy, may contain traces of eggs
K-Edge Garmin IHS
- For Integrated Handlebar (one piece) bar/stem - Pro-level mount with -7 degree articulation for custom computer positioning - Lifetime warranty. CNC Machined. Black Anodized - GARMIN approved replaceable computer insert protects computer tabs - Combo- Computer and GoPro style camera/light compatible - M5 hardware included. If a smaller bolt required, use an 8.4mm washer to ensure a secure fit. - Made in House. Boise, Idaho USA
K-Edge Wahoo Max XL
- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g with combo adapter - Weight: 50g - Mount Type: Clamp 31.8mm - Mount Weight: 53g Compatibly: - All Wahoo Cycling Computers- ROAM, BOLT, ELEMNT, MINI - Combo compatible (GoPro-style light/camera interface), K13-580-BLK adapter sold separately
Kenda K-Rad
- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application
Kind Shock Southpaw
- 1x Systems compatible - Multi-axis adjustable body with split clamp - Easy to install
Pembree DBN Seat Post Clamp
PEMBREE DBN is an entirely new seat post clamp. Due to the double barrel nuts DBN provides a consistent clamping force ensuring the bolt remains straight through-out its travel. This is particularly important when clamping dropper posts to prevent pitch points that damage frames and posts. Machined to exacting standards ensures a precision fit that is critical to secure clamping. DBN seat post clamp is manufactured from aluminium that is 75% recycled, unheard of in the industry. Machined from stainless steel the precision, custom made bolt provides the core clamping function of DBN. - Clamp: Aluminium - Bolt: Stainless Steel TX25 - Barrel Nuts: Aluminium - Weight: 27g - Warranty: 5 Years
Page 1 of 543 Next page